INSTALLATION:

Install the Roller Dog in a level position. Connect the lead-in cord to a suitable outlet of correct voltage.

CONNECTION LOAD:

AC only. Use grounded 120 V AC circuit.

OPERATING PROCEDURES:

1. Place hot dogs on rollers. Turn heat to designated temperature. Left knob controls the heat of one set of five (5) rollers and the right controls the other set of five (5) rollers.

2. For low heat, set control (s) to LOW using one or both sets of rollers. For high capacity, set control (s) to MEDIUM or HIGH using both sets of rollers.

CARE AND CLEANING INSTRUCTIONS:

1. UNPLUG THE POWER CORD FROM THE OUTLET!!

2. Remove any remaining hot dogs from rollers.

3. Remove drip pans and clean thoroughly.

4. Use a mild detergent, soap and water, or soda water to clean the roller grill. Rinse after washing and dry thoroughly before using.

5. For spots or stains that are difficult to come out, a mild household abrasive cleaner can be used. When applying abrasive cleaners always rub in the direction of the grain to preserve metal finish.

6. When unit has been thoroughly cleaned, rinsed and dried, re-insert drip pans beneath the rollers.